Facultad de Ingenierías

Permanent URI for this communityhttp://172.16.0.136/handle/123456789/32

Browse

Now showing 1 - 20 of 403

Análisis de la asignación salarial para el diseño del manual de funciones del personal en las Unidades de Trabajo Legislativo en el Honorable Senado de la República
López-Sánchez, Angie Ximena; Ruiz González, Julio Faenz
The objective of this study is to analyze and determine if the current salary allocation for positions in the Legislative Work Units of the Senate of the Republic is consistent with the functions, tasks and responsibilities of each of the positions. To carry out this analysis, the information regarding the positions of assistant and advisor in national and international entities was taken into account, specifically, entities of the same magnitude in Latin America in order to evaluate and compare the functions and the required requirements, analyzing levels of experience and schooling, which were modified and recorded in the attached functions manual which additionally allowed to verify if the salaries were equitable with the functions by assessing the positions by the factor and point method. This method allowed us to analyze which positions received more or less income with respect to their functions and their importance in the Unit, thus determining which positions required modifications, in order to find a correlation between the score obtained and the salary received. The increases and decreases were made in an equitable manner in order to maintain the general budget which is determined for each Congressman under article 388 of the 5th law. The corresponding modifications generated a variation of $ 1,449,726, which generated an increase in attendees III, IV and V and a decrease for the same value between the positions of advisor I, VI and VII and assistant I.
Propuesta de gestión para el mejoramiento de la distribución en el área de ensamble del regulador para gas R203 de la empresa metalmecánica Industrias Humcar S.A.S
Peña-Guzmán, José David; Cruz Villarraga, Nelson Humberto
This work contributes to a proposal for improvement in the assembly area for the most representative regulator for Industries Humcar S.A.S. which is R203, it was made based on the current area. The company is dedicated to the manufacture and distribution of accessories for gas which is located in the city of Bogotá and distributes nationally and internationally. In the first part, the identification of the problem is shown, which consists in the company having to produce parts at a low cost in order to win tenders, therefore, if it does not, it can lose the market. Then an analysis of the distribution factors in the plant in the assembly area, a study of time, material path, and 5S study was performed. When studying the situation it is proposed to make a U-cell in such a way that unnecessary records of the material within the assembly area are reduced, also proposing an adequate 5s, strategies to reduce the bottlenecks and specifically a JIT in order to have a continuous, synchronized and balanced flow.
Implementación de un apiario sustentable en una base tecnológica
Parra-Beltran, Brigite-Manuela; Ospina-Barrera, Luisa-Daniela; Cruz-Villarraga, Nelson-Humberto
In the present work we will present our beekeeping entrepreneurship project which presents a business model focused on the sale of honey and the development of a business idea that allows the inhabitants of the municipality of Icononzo to obtain additional income. Due to the above, AmiAbeja intends to lead and develop the aspects that are part of some of the sustainable development objectives such as: decent work and economic growth and life of terrestrial ecosystems. This venture is based on the model of automatic flow hives that allow the preservation and conservation of the life of bees and respect their honey production without resorting to their exploitation and help the flora and fauna of our country. It is also important to recognize the impact that is intended to be achieved in society, specifically in the inhabitants of this municipality, since they will have access to free training through a web page created for them who will be the internal clients and for the external clients who are those who want to acquire quality honey.
Propuesta de mejora de ruteo para entregas de pedidos diarios en Bogotá D.C. de la empresa BIG BRANDS IN KEY ACCOUNTS SAS.
Riveros-Cabezas, Diana Andrea; Vargas-Rodriguez, Yeisson Andres; Rodríguez, William Camilo
The main objective of the document is to propose a mathematical model that allows the reduction of distribution times in the company BBINKA S.A.S.; to carry out the development of the project, information was collected which allowed the analysis of all the current variables that were affecting the operation and in the same way to understand the commercialization structure of the company. With this information, It was possible to graphically construct routes, distances, and the number of daily orders, both delivered and delayed, and with all these variables it was possible to approximate the total number of kilometers traveled daily by the company's only vehicle. Based on all this, It was determined the key variables and parameters, time windows, operation time, and distances between clients, among others. Research was conducted on the different operations investigation models with a focus on solving transportation and distribution problems, in order to establish the model, heuristics or metaheuristics that best fits the problem presented by the company in question. It was determined that the TSP-TW model with metaheuristics of the ant colony is adapt to the problem posed and through its entire methodological structure an improvement can be proposed. The model proposed in this document was validated with several sensitivity analyses to test the stability, which meets all constraints such as time windows and identify the optimal solution for each daily route.
Propuesta de mejoramiento para el proceso de gestión de inventarios en una comercializadora de calzado en Bogotá combinando el enfoque Harrington y las técnicas de control de stock
Pacheco-Castro, Jenniffer Amanda; Sánchez Tovar, Nolan
The present degree work was developed in order to design a management proposal that allows controlling the inventory stock in a Footwear Trading Company. For the development of the project, real information from a shoe trading company in the city of Bogotá was used, which was listed as a leader in the footwear business in 2018 according to Portafolio magazine (2019) along with two other companies in the sector. However, throughout the document there is no mention of the commercial name or its business name at the request of the company. Therefore, the information in the document was handled anonymously in order to maintain its Good Will. As for the methodology used for the development of the project, engineering tools were used such as: the problem tree, which was used to diagnose one of the flaws presented by the company, in addition to using other techniques such as inventory recoding, ABC analysis for the categorization of items, analysis of the installed capacity of storage space, security stock management and reorder point On the other hand, it was decided to combine the Harrington methodology with the different techniques of stock control, in order to establish a guide or steps to follow to assimilate and implement in the best way the change of the process in the inventory management, and of This way reduce resistance to change in all areas of the company.
Sitio Web para registro y control de autopartes de motocicletas
Niño-Delgadillo, Juan Sebastian; Valle-Diaz, Francisco Clemente
This document describes the design and development of a website, which allows knowing if a motorcycle or a part that is part of it, was stolen. This website is developed with various information management technologies, tag languages such as HTML are implemented, this being the base and structure of the site, style development technologies are also applied, to give a more aesthetic appearance to the website, also information management technologies and databases were implemented, through PhpMyAndmin, which was our manager and facilitated several processes to simplify the operation, Php programming was also implemented, in order to generate a communication channel between the website and the database, and last but not least, using the XAMPP server tool, we implement the Apache web server to perform the entire simulation. All the proposed activities were carried out in order to find the operation of the website, and lay the foundations so that in the future the website is implemented on the Internet and this is a benefit for the entire Colombian population at the national level.
Desarrollo videojuego acerca de la vida de San Agustín
Espinosa-García, Diego Ricardo; Rodríguez-Bedoya, Cristian Camilo; García Roa, Nidia
The central objective of this project is based on demonstrating visual development a videogame summarizing important events in the life of San Agustin with an interaction of questions and answers that will be given throughout the tour historical places will be recognized in nine different scenarios previously established with the project director Ing. Nidia García; throughout the document details and descriptions of the tools used, likewise the instructions for a correct use of the established controls, the various characters that you come across and how their interaction with the main character can change the course of the story, an organized methodology related to video games such as SUM was followed where the execution times of each procedure to be performed were met. This project helps to better understand the concepts of the game and visual result, with a tactical analysis a positive effect is given when demonstrating in different videos a correct aesthetics and following the theme to the letter.
Desarrollo web para la globalización general de la empresa O.G ingeniería medica
Ospina Medina, Daniel Mateo; Bernal Gómez, Juan Pablo; Villalba, Mauricio Alonso
Over the last decade, the use of the internet and technological tools have been adapted for any person, regardless of the place or time can be accessed communication and information tools, that is why the vast majority of companies They bet to mount and upload their portfolio to the network, with which customers can consult, acquire and visualize any product or service interactively, in addition to improve the professional image of the company, and automate processes. The web portal is developed for the company OG Ingeniería Medica in order to streamline the processes of acquiring services and products taking aim to cover a larger market with respect to the imaging The project is developed as an internship by the students Mateo Ospina and Juan Pablo Bernal, University Uniagustiniana. The project was developed using the Scrum methodology, which allowed for updates of each stage of the project, maintaining defined roles and practices for feedback with the company and ensuring the success of the project, using the HTML, PHP, CSS and JS tools. The project concludes that the use of technological tools speaking entrepreneurially I generate the following benefits which are: improvements in profits and hiring, improved interaction with customers and suppliers, improved image professional of the company, projecting it not only locally but also internationally, I streamline that the company's internal processes improved substantially.
Creación de un aplicativo web orientado a la gestión y comercialización de productos en línea para la empresa comercializadora avícola Los Baquero
Garcia-Prieto, Jhonattan José; Acosta-Orjuela, Duver Rene
This document presents the situation and requirements for the development of the web application for the online product management of “Avícola Los Baquero”. It outlines the characteristics of a traditional poultry company and its transition to the digital market through the creation of the website. The primary focus of the web application is to allow users unfamiliar with the company to learn about it and purchase products through e-commerce. However, additional functionalities that digital tools offer have been incorporated, such as sales report management, product trend reports, and the creation of communication channels between users and the company. This channel will remain open for message reception in a stable and continuous way, providing options for potential customers to access the company’s products and services even outside working hours.
Desarrollo de una plataforma web para el seguimiento y alcance de metas financieras
Avila-Triviño, Juan Felipe Francisco; Páez Puerto, Miguel Angel; Rene-Ojuerla, Duver
This project focuses on evaluating, How? The development of a Web platform for monitoring and achieving financial goals impacts the efficiency of personal financial management. This includes identifying key features, analyzing financial efficiency, exploring benefits and challenges for users. The methodology combines surveys and interviews, supported by a literature review. The results will be analyzed and presented in a detailed report, followed by a presentation. Planning includes continuous evaluation to ensure project quality. The methodology combines surveys and interviews, supported by a literature review. The results will be analyzed and presented in a detailed report, followed by a presentation. Planning includes continuous evaluation to ensure project quality.
Propuesta de diseño de una máquina embaladora de libros de diversas dimensiones
Rodríguez-Peraza, Sergio Andrés; Mendoza-Páez, Jhonson David; Sanabria-Gómez, Juan Nicolas; Guayacundo-Cruz, Wilmer
This research addressed the issue of book packaging in bookstores with home sales, because at times of high flow, a bottleneck is created because the employees are not able to cope with the packaging and delay shipments. The main objective of the paper was to create a proposal for the design of a packaging machine for books of various dimensions. To carry out this work, the system requirements were collected through the development of the Quality Function Deployment (QFD) through interviews, then the design methodology of Karl T. Ulrich was applied, subdividing the problem, generating sketches and filtering them with evaluation matrix to arrive at the final sketch. The machine was subdivided into critical processes and materials, sensors and actuators were chosen for each subsystem by means of multicriteria matrix. It was concluded after the 3D modeling, the mechanical simulations of movement, electronic connection and control, validating the program logic, that a design has been obtained which can be adapted to the different commercial dimensions of the books, preserving the integrity and quality of the bookstore, with an active and passive security system capable of protecting the machine operator. When performing the financial evaluation, the internal rate of return was 7%, which means that the project is financially sustainable and meets the expectations.
Plan de mejora para los procesos productivos de la Industria Metálica Josan S.A.S mediante la aplicación de herramientas de ingeniería industrial
Gutierrez Contreras, Miguel Angel; Murcia Pira, Luis Sebastian; Rios Pulido, Nicolas Roberto; Quiroz Castellanos, Carlos Andres
The Josan metal industry is a company dedicated to the manufacture of different products and services in the metalworking field; today, industries find challenges that they need to overcome in order to be competitive and grow in increasingly globalized markets, which leads them to re-evaluate the organization of the company and focus on improving production. This project sought to orient the company towards the implementation of industrial engineering tools, such as the philosophy of Lean Manufacturing, focusing on the processes in which waste, delays, transport or movements were evident. Unnecessary, among other opportunities for improvement. For the development of the project was paramount the study of the productive environment and to make a diagnosis of the area of production to identify all the waste and flaws present in the equipment and area s of work so that it was possible to develop a plan of improvement that manages to establish an effective organization of the work space in the handling of the raw materials and the wastes, in addition, to implement training tools that allow the reinforcement of the concepts and the methodologies for the continuous improvement , in order to achieve the optimization of the company's processes. Every company is susceptible to improvement, especially those of the industrial sector, for this reason, by means of the application of tools of industrial engineering and Lean Manufacturing, like 5 ' S, distribution in plant, analysis of cause-effect, advised and support to the Metal industry Josan, who provided the information and permits for the periodic visit to the facilities, which allowed to identify the flaws in the productive area s, with the purpose of this investigation to achieve the degree of observation necessary to carry out the analysis both quantitative and qualitative, generating a proposal focused on the effective management of the material, technological, economic and human resources present in the company. The management of these resources are essential to implement improvements aimed at improving quality, productivity, supply, reduction of waste and utilization, which are the basis of this research so that In evaluating them allow the correct development of the project and which met the needs present in the metal industry Josan to increase their competitiveness and profits.
Propuesta de mejora para la planeación y ejecución de la producción a través de un sistema MRP en la empresa Extra Granos del Campo S.A.S
Monterroza-Meza, Angelly; Celi-Martínez, Luis Fernando; Rodríguez Florián, Román Leonardo
Extra Granos del Campo S.A.S. is a Colombian company that belongs to the industrial manufacturing sector, for about 4 years; this company is dedicated to the elaboration of toilet products, by means of an analysis made to the manufacturing processes of the company, inefficiencies in the production system were identified, which guided the organization to take action on the problems affecting the delivery of orders and the limitation of materials for manufacturing. For the development of this work is based on the use of engineering tools, allowing in this way to establish a proposal for improvement of processes. A proposal based on material requirement planning (MRP) is therefore defined, which in turn required the use of the Master Production Plan (MPS) tool with the aim of efficiently determining the demand for materials according to production.
Propuesta de un plan estratégico de seguridad vial utilizando herramientas brindadas por la NTC ISO 39001 en el proceso de transporte de la empresa Albergue Sukurame S.A.S. sede Bogotá.
Guerrero-Rodriguez, Brayan Stiven; Rojas Larrota, José Dulfo
The main objective of this degree project is to present the Strategic Road Safety Plan's proposal using the tools provided by the NTC ISO 39001 in the transportation process of the company Albergue Sukurame S.A.S.; For the development, was made a general diagnosis of the transportation process of Albergue Sukurame S.A.S. in Bogota's facility; later, an audit is made where the current status of Albergue Sukurame S.A.S. can be evidenced against the NTC ISO 39001. Based on the results obtained, the Strategic Road Safety Plan was drawn up, which includes the execution of activities that can help increase road safety for officials, users and other road actors. Finally, and in accordance with the Strategic Road Safety Plan proposed, a financial analysis was made and a budget was presented parallel to this that allowed finding the economic viability of the project (100% viable). And for finish, some basic recommendations are established that include the continuous improvement of the PESV, the need for the support of senior management and the commitment of all the employees of Albergue Sukurame S.A.S to increase road safety as a social responsibility.
Diseño de invernadero para un cultivo de vegetales
Durango-López, Roberto Carlos; Cruz-Guayacundo, Wilmer
The main objective of this thesis is to develop the first phases of an intelligent greenhouse that allows the cultivation of representative vegetables of Colombian agriculture in order to improve the quality and quantity of indoor crops in the country. In order to carry out this project, we first identified several problems of the country's agricultural crops and through interviews we were able to identify the requirements requested by farmers in order to propose a satisfactory solution. With these factors, the design methodology was implemented, which initially contemplates the selection of the type of greenhouse to be developed by means of decision matrices, then the QFD quality house was used to define the product and the conceptual design was made to select the concept to be worked on, then the detailed design was made to analyze the selected concept, followed by 3D modeling with Autodesk Inventor software in which the safety factor analysis and the deformation that may occur were made, and finally the design was brought to reality by means of a prototype and a physical presentation.
Propuesta de un embalaje para mejorar las entregas de productos que requieren ser transportados en distintas temperaturas “EMBALAJE MULTI TEMPERATURA”.
Laverde-Gonzalez, Daniel Esteban; Benjumea-Lizarazo, William David; Sanchez-Tovar, Nolan
The pharmaceutical industry presents its customers with products that require conservation of the cold chain, such as biologicals and reagents. The conservation of this chain is key to the preservation of its pharmacological characteristics and consequently, the effectiveness of its application. In this industry, distributors face a problem related to the distribution of medicines that require different temperatures for their conservation, in situations where aggregate orders are generated. In these cases, there is no specialized packaging with which the two temperatures are handled so that said delivery can be made simultaneously. This results in problems such as loss of quality in medicines, customer returns, and transportation and packaging costs for the distribution of medicines in separate vehicles. This work aims to propose a packaging alternative to improve the deliveries of products that need to be transported with conservation of the cold chain and room temperature, for the company Biotoscana S.A.S. In this way, it seeks to improve customer satisfaction both in terms of time and product quality and also achieve a reduction in transport costs.
Diseño conceptual de un modelo de gestión RCM para una empresa de catering aéreo.
Sotelo Riaño, Arbi Yadir; Hoyos Trujillo, Manuel Guillermo
Catering as a service provider must be highlighted by the quality of its production processes, each of the areas that make up this organization must be aligned to the fulfillment of the organizational objective that is the delivery of a service in optimal conditions, with respect to to this objective the maintenance area of the catering company has a problem in the management of maintenance because there is no model that guarantees the fulfillment of the internal objectives within the area, focused on the maintenance of the assets. The lack of a maintenance management model has led to the presence of problems between the different areas since the guidelines for programming and executing the activities that have to be focused on reliability are not followed. Within the development of the work will present the different elements that are part of operational reliability focused on maintenance with respect to each of the elements, will develop a management model based on the four perspectives that have the Balanced Scorecard tool, which allows the creation and implementation of indicators (KPI`s), for the measurement and traceability in the management model that will be developed.
Sostenibilidad del recurso hídrico mediante la siembra de plantas nativas a partir de la agricultura esbelta - en el municipio de San Juan de Arama (Meta)
Vanegas Cañon, Luis Alirio; Reyes Moreno, Alexander
In this research, we review the problems and the main causes of shortage of the surface water resource in the municipality of San Juan de Arama Meta. The main objective of the research is to implement the development of the project called "SUSTAINABILITY OF HYDRICAL RESOURCE THROUGH THE SOWING OF NATIVE PALNTAS FROM THE ESBELTA AGRICULTURE IN THE MUNICIPALITY OF SAN JUAN DE ARAMA (META)". After the investigations carried out by the students, several conclusions have been reached about the possible causes for which these drawbacks are presented within some of the town's sidewalks, the whole community agrees that the shortage of surface water. In the main micro waters of the municipality is due to the indiscriminate felling of native forests in the areas surrounding the water sources, also the community manifests with the nonconformity of the presence of some mineral exploiters in the region, which are the cause of the problem. The mitigation of this problem will be achieved through the implementation of techniques and tools that have been acquired throughout the industrial engineering career of the project executors through the implementation of lean agriculture, with the application of Kanban, just in time, 5 s, and total quality. During the execution and development of the project.
Propuesta de implementación del sistema de gestión de seguridad y salud en el trabajo bajo la resolución 0312 de 2019 para la empresa Doble click consultores
Castellanos-Garcia, Claudia Esperanza; Buitrago, Sandra Milena; Segura-Rivera, Angie Camila; Castro Jiménez, Laura Elizabeth
Doble Click Consultores is an entertainment organization that offers training and consulting services through training and well-being based on Neuro-didactics, generating high-impact results in organizations. The purpose of this work is to diagnose the current state of the organization in terms of occupational health and safety requirements with the aim of presenting a proposal for the implementation of the occupational health and safety management system to comply with the Colombian current regulations of Decree 1072 of 2015 according to resolution 0312 of 2019 presenting a work plan in accordance with the minimum standards established. A diagnosis was made to determine the status of the company, also a data collection that allowed to see in a physical and documentary way the compliance or progress that the company has to date and additionally demonstrate the risks or dangers to which the workers are exposed. A schedule of activities was made that allowed to see the status of the organization and perform all the necessary requirements to carry out the proposal, where finally an annual work plan and an infogram was made that shows the step by step for the implementation of the security system and occupational health to meet the objectives.
Propuesta de estandarización para la fundición de lingotes de aluminio en la empresa recuperadora de metales Ruby c
Almanzar corredor, Cristian Jose; Ballen Hernandez, Daniel; Ramos Calderon, Bryan Humberto; Ruiz Gonzalez, Julio Faenz
The company we chose for our research and application of times and movement, industrial plant design and continuous improvement through the 5'S, is called Recuperadora Ruby C, is located in the outlets of the municipality of Soacha in a rural area; This company is responsible for producing a production process in metal smelting furnaces going from solid state to liquid and liquid to solid state again. Unfortunately during the enterprise development of this company, productive and administrative operations have been carried out in an empirical way, and as the company owner Mrs. Ruby Calderón mentions, the results have not been the best due to the business disorganization that You have The star product within the company Recuperadora Ruby C is the aluminum ingot of recycled material derived from pots, lids, foils, beverage cans, aluminum foil, bicycle and car wheels, deodorant sprays and toiletries, Automotive spare parts, among others, obtained from companies dedicated to the commercialization of scrap in the city of Bogota and waste aluminum materials purchased from different companies engaged in the manufacture of aluminum products, the production process of smelting ends with A finished product called aluminum ingot of different sizes according to the requirements of customers.

Browse

Browsing Facultad de Ingenierías by Issue Date